FRP Pressure Vessel
FIBRE REINFORCED PLASTIC COMPOSITE PRESSURE VESSELS
FOR WATER FILTRATION OF RESIDENTIAL, COMMERCIAL AND INDUSTRIAL APPLICATIONS
ALFA ~ AEROSOL provides exceptional benefits – easy to operate, user- friendly, and cost-efficient FRP Pressure Vessel / FRP Filter Tank for various applications across the water treatment chain. The innovative design helps it delivering safe, clean, and healthy water by effectively removingall biologically harmful contaminants.
ALFA ~ AEROSOL FRP Pressure Vessel / Filter Tank is considered the most energy-efficient filtration systems available in the market which requires very low maintenance. The various capacities of
vessels/tanks help in selecting the best suitable for any specific needs.
For excellent efficiency and longevity in harsh chemical conditions, our filter tanks reinforced with fiberglass design with polyethylene interior provides the best possible solution. It is non-intrusive, most economical water treatment and storage solution for commercial and industrial purposes. Each unit is properly checked for 100% pressure control along with consistency before dispatching from our modern manufacturing facility.
OPERATING PARAMETERS
- Maximum operating pressure – 150PSI
- Maximum operating temperature – 120°F
MATERIAL OF CONSTRUCTION
- Polyethylene inner shell
- Fibre Reinforced Plastic Layer
ALFA ~ AEROSOL DESIGN PARAMETERS
- Safety Factor – 4: 1
- Minimum Burst at 600PSI
- Tested to 2,50,000 Cycles without leakage
PRODUCT FINDER
FLOW
DIA
OPENING
OPENING SIZE
FEATURES & BENEFITS
For Residential, Commercial and Industrial water treatment and storage.
High resistence to chemicals with outstanding durability in harsh environments.
3 years manufacture warranty of vessel
Free from rust and formation of algae in the vessel.
Used for various applications like water softener, sand filter, carbon filter, iron removal filter etc.
| CAPACITY / VOLUME | OPENING | |||||
|---|---|---|---|---|---|---|
| SIZE | MODEL | LITERS | GALLONS | TOP | BOTTOM | Specification (mm) |
| 635.0 | TOP | 14.5 | 3.8 | 2.5″ NPSM | – | 152 X 889 |
| 735.0 | TOP | 16.0 | 4.2 | 2.5″ NPSM | – | 180 X 875 |
| 825.0 | TOP | 17.5 | 4.6 | 2.5″ NPSM | – | 200 X 635 |
| 844.0 | TOP | 33.0 | 8.7 | 2.5″ NPSM | – | 200 X 1100 |
| 1054.0 | TOP | 62.0 | 16.4 | 2.5″ NPSM | – | 250 X 1350 |
| 1248.0 | TOP | 78.0 | 20.6 | 2.5″ NPSM | – | 300 X 1219 |
| 1354.0 | TOP | 103.0 | 27.0 | 2.5″ NPSM | – | 325 X 1350 |
| 1465.0 | TOP | 145.0 | 38.0 | 2.5″ NPSM | – | 350 X 1625 |
| 1465.0 | TOP& BOTTOM | 145.0 | 38.0 | 4" 8UN | 4" 8UN | 350 X 1625 |
| 1665.0 | TOP | 186.0 | 49.0 | 4" 8UN | – | 400 X 1625 |
| 1665.0 | TOP& BOTTOM | 186.0 | 49.0 | 4" 8UN | 4" 8UN | 400 X 1625 |
| 1865.0 | TOP& BOTTOM | 236.0 | 62.0 | 4" 8UN | 4" 8UN | 450 X 1625 |
| 2162.0 | TOP& BOTTOM | 312.0 | 82.5 | 4" 8UN | 4" 8UN | 525 X 1500 |
| 2472.0 | TOP& BOTTOM | 450.0 | 119.0 | 4" 8UN | 4" 8UN | 600 X 1800 |
| 3072.0 | TOP& BOTTOM | 750.0 | 198.0 | 4" 8UN | 4" 8UN | 750 X 1800 |
| 3672.0 | TOP& BOTTOM | 1000.0 | 264.0 | 4" 8UN | 4" 8UN | 900 X 1800 |
| 4272.0 | TOP& BOTTOM | 1300.0 | 345.0 | 6" SNA | 6" SNA | 1050 X 1800 |
| 4872.0 | TOP& BOTTOM | 1800.0 | 475.0 | 6" SNA | 6" SNA | 1200 X 1800 |
| 6386.0 | TOP& BOTTOM | 3200.0 | 845.0 | 6" SNA | 6" SNA | 1600 X 2184 |
note: side manhole vessels are available on order basis
Process
Raw Material Incoming
The first process of manufacturing any product is procuring raw material. and that we make sure to get the raw material from standardize vendors who maintain quality of the material upto the mark.
Collection Chamber
The material is then brought to the collection chamber where a team of QC individuals check and approve the raw material for further processing of manufacture like Blow Molding, Injection Molding, Filament Winding etc.
Blow Molding
Our advance fully autonomous series of Blow Molding & Rota Molding machines which can produce vessels and tanks from 20 Liters to 1200 Liters produce the high quality liner of vessels with maximum strength and durability within short space of me.
Checking of Liner
The liner which is produced by blow molding machines are then move forward for testing where the liner is process through several test like leakage test, Puncture test, stretch test etc.
Fiberglass Filament Winding
The liners are then further processed to filament winding. A process which is an intelligently automated controlled that covers the entire vessel with high quality fibre glass which provides tensile strength to the vessel.
Base Joinng
The strong FRP Pressure Vessel requires even stronger BASE. The base of the pressure vessel is made up of complete FRP to uphold the strength of 10 times than it actual strength holding capacity
Hydro Testing
The complete FRP Pressure vessel will now be tested and push beyond the limits by testing the pressure vessel 10 times more than its actual pressure holding capacity to be ensured about the quality of the pressure vessel.
QC Inspection
A team of qualified engineer inspect the vessel for any kind of error that can comes in the manufacturing. Once inspected the pressure vessels are moved to the labeling section.
Labeling & Packing
The pressure vessel will now be labeled and packed with specially made corrugated boxes to prevent any damage in transpiration.
Forwarding To The Clients
A complete furnished FRP Pressure Vessel with extreme fine quality will now be ready to be dispatch to our respected clients.
Trusted Partners
